New Excavators at Ditch Witch of Ohio, Western PA and Western NY
In geometry, 360° is a complete revolution. In the underground construction world, it's 260°. The revolution began with the Ditch Witch XT850, featuring a dual-pivot excavator system with a 260° total excavator sweep that lets you offset dig like never before. The Ditch Witch XT1600 continued the revolution, combining three exceptionally powerful compact machines in one.
DIMENSIONS - TOOL CARRIER U.S.
Operating height, w/ standard bucket, max. 104 in
Hinge pin height, max. 83 in
Dump height, w/ standard bucket, max. 69 in
Bucket rollback angle, top, standard bucket 115°
Dump angle, top, standard bucket 25°
Reach, w/ standard bucket, fully raised 21 in
Bucket rollback angle, ground level 16°
Reach at grade, standard bucket 34 in
Wheelbase/track length 46 in
Overall height of machine 89 in
Bucket width, max. 52 in
Machine width 50 in
Overall length, excavator stowed 120 in
Weight 3980 lb
DIMENSIONS - EXCAVATOR U.S.
Loading height, max. 72 in
Dig depth, max. 83 in
Dig depth, 2 ft (0.6 m) flat bottom 79 in
Reach from swing post, max. 103 in
Swing angle from center 130°
Total swing angle 260°
POWER U.S.
Engine Kubota D1105-E
Fuel Diesel
Cooling medium Liquid
Injection Indirect
Cylinders 3
Displacement 68.5 in3
Bore 3.07 in
Stroke 3.09 in
Manufacturer's gross power rating per SAE J1349 26 hp
Estimated net power rating per SAE J1995 24.5 hp
Rated speed 3000 rpm
FLUID CAPACITIES U.S.
Fuel tank 10 gal
Engine oil 4.2 qt
Hydraulic system 10 gal
BATTERY U.S.
SAE reserve capacity rating 80 minutes
SAE cold crank rating @ 0° F (-18° C) 525 amps
Electrical system 12V
Speifications are general and subject to change without notice. If exact measurements are required, equipment should be weighed and measured. Due to selected options, delivered equipment may not necessarily match that shown. U.S. patent pending.
The Ditch Witch XT850 features a unique, dual-pivot excavator system with a 260° total excavator sweep, for wider offset digging capability than most compact utility equipment. The 24.5-hp (18.3 kW) XT850 has independently controlled rubber tracks for zero-radius turning capability when you're in a tight spot. It's made for tight budgets, too, as it comes complete with a specially designed trailer and attachments.
Dual-pivot excavator system with a 260° excavator sweep provides unparalleled offset digging capability; operator can dig against a footing or wall and dig a number of trenches from one place.
Minimal ground pressure reduces restoration expense and turf damage.
DIMENSIONS - TOOL CARRIER U.S.
Operating height, w/ standard bucket, max. 155 in
Hinge pin height, max. 121 in
Dump height, w/standard bucket, max. 85 in 2.16 m
Bucket rollback angle, top, standard bucket 60°
Dump angel, top, standard bucket 50°
Reach, w/ standard bucket, fully raised 20 in
Bucket rollback angle, ground level 23°
Reach at grade, standard bucket 61 in
Wheelbase/track length 58 in
Overall height of machine 107 in
Bucket width, max. 73 in
Width 69 in
Overall length, excavator stowed 179 in
Weight 9420 lb
DIMENSIONS - EXCAVATOR U.S.
Loading height, max. 122 in
Dig depth, max. 134 in
Dig depth, 2 ft (0.6 m) flat bottom 133 in
Reach from swing post, max. 177 in
Swing angle from center 130°
Total swing angle 260°
POWER U.S.
Engine Kubota V2003-M-DI-TE2B
Fuel Diesel
Cooling medium Liquid
Injection Direct
Number of cylinders 4
Displacement 112 in3
Bore 3.27 in
Stroke 3.64 in
Manufacturer's gross power per SAE J1349 59 hp
Estimated net power per SAE J1995 53 hp
Rated speed 2800 rpm
FLUID CAPACITIES U.S.
Fuel tank 20 gal
Engine oil 8 qt
Hydraulic reservoir 16 gal
BATTERY U.S.
SAE reserve capacity rating 80 min
SAE cold crank rating @ 0° F (-18° C) 800 amps
Electrical system 12V
The XT1600 excavator-tool carrier is an exceptionally efficient and cost-effective machine. Actually, it is three machines in one: a backhoe loader, mini excavator, and skid steer. With its 53-hp (39.5 kW) diesel engine and 30 net hp (22.3 kW) to the attachment, the XT1600 can run most full-size skid steer attachments and perform a tremendous range of tasks.
Innovative Equalizer track system with pivoting rollers keeps more track on the ground, increasing ride comfort, reducing operator fatigue, and improving productivity.
Stabilizers on the excavator end provide additional machine stability when digging in tough soils.
