New Directional Drills at Ditch Witch of Ohio, Western PA and Western NY
The new Mach 1 series of Jet Trac HDD systems offers increased power and automated features such as simplified Mach 1 electronics, cruise control and automated pipeloader functions that make each the most efficient and productive horizontal directional drilling machine in its size and class.
JT520 DIMENSIONS U.S.
Overall machine length* 117 in
Overall machine width* 35.5 in
Overall machine height* 66.5 in
Drilling unit operating mass* 3150 lb
Entry angle 11° to 16°
Angle approach 18°
Angle departure 18°
POWER PIPE U.S.
Length of drill pipe (nominal)* 59
Diameter of drill pipe tool joint end 1.75
Diameter of drill pipe 1.1 in
Minimum bend radius 70 ft
Weight of drill pipe (lined) 16 lb
POWER U.S.
Engine Kubota D1105-ES
Fuel Diesel
Cooling medium Liquid
Injection Indirect
Aspiration Natural
Cylinders 3
Displacement 68.6 in3
Bore 3.07 in
Stroke 3.09 in
Manufacturer's gross power rating ** 26 hp
Rated speed 3000 rpm
DRILLING FLUID SYSTEM (ON-BOARD)* U.S.c
Max drilling fluid pressure 500 psi
Max drilling fluid flow 5 gpm
FLUID CAPACITIES U.S.
Hydraulic reservoir 8 gal
Fuel Tank 10 gal
BATTERY U.S.
SAE reserve capacity rating 85 min
SAE cold crank @ 0° F (-18° C) 525 A
Specifications are general and subject to change without notice. If exact measurements are required, equipment should be weighed and measured. Due to selected options, delivered equipment may not necessarily match that shown. *Called out according to SAE J2022, **called out according to SAE J1995
When you find yourself in a tight space with a tight deadline, the JT520 is your HDD solution. Bury service wire and pull up to two-inch (50 mm) diameter conduit up to 150 feet (46 m), then head to the next job—no costly restoration of lawns, streets, or sidewalks.
Compact and maneuverable; the JT520 can be transported with a 3/4-ton pickup and fit through a 36-inch (910 mm) yard gate; ideal for shallow product installations in congested locations.
Rugged construction for even the most demanding short-range installations.
117-inch (2.97 m) compact size allows street setup without blocking traffic.
Model JT921 replaces the JT920 with a more efficient engine and increased thrust and pullback power. A shorter version, JT921S, has a narrower pipe box and no fluid tank that allow it to handle work in tight spaces. JT921 does pilot bores up to 4 inches and backream diameters up to 8 inches. It has 9,000 pounds of thrust/pullback.
Easy to mobile, easy to turn, and rides on turf-friendly tracks for less surface disturbance.
Shortest drill in its class, for easy setup in tight spaces.
Operator is positioned near the center of the pipe rack for easy pipe handling; seat slides fore and aft so pipe is easy to reach.
JT922 DIMENSIONS U.S.
Overall machine length 146 in
Overall machine width 48 in
Overall machine height 74 in
Operating weight (water tank full, 50 drill pipes) 7100 lb
Entry angle 10° to 14°
Angle of approach 18°
POWER PIPE U.S.
Length of drill pipe, nominal 72 in
Diameter of drill pipe tool joint end 2 in
Diameter of drill pipe 1.58 in
Minimum bend radius 105 ft
Weight of drill pipe (lined) 29 lb
OPERATION U.S.
Maximum spindle speed 186 rpm
Maximum spindle torque 1100 ft·lb
Carriage thrust travel speed 188 fpm
Carriage pullback travel speed 188 fpm
Thrust force 9000 lb
Pullback force 9000 lb
Bore diameter 3 in
Backream diameter Soil dependent
POWER U.S.
Engine Deutz F4L2011
Fuel Diesel
Cooling medium Integrated oil
Injection Direct
Aspiration Natural
Number of cylinders 4
Displacement 189 in3
Bore 3.7 in 94 mm
Stroke 4.4 in 112 mm
Manufacturer's gross power rating 53.5 hp
Rated speed 2300 rpm
DRILLING FLUID SYSTEM U.S.
Maximum drilling fluid pressure 750 psi
Maximum drilling fluid flow 9 gpm
Fluid tank capacity 40 gal
FLUID CAPACITIES U.S.
Fuel tank 19 gal
Hydraulic reservoir 18 gal
BATTERY U.S.
SAE reserve capacity rating 165 min
SAE cold crank rating @ 0° F (-18° C)
Specifications are general and subject to change without notice. If exact measurements are required, equipment should be weighed and measured. Due to selected options, delivered equipment may not necessarily match that shown.
The 53.5-hp (39.9 kW) JT922 combines the simplicity and easy operation of smaller drills with the advanced features of bigger machines—like a heavy-duty anchor system, open-top vise wrenches, and an integrated remote display. And it all comes in an affordable little package that's easy to own and easy to haul.
JT922 comes with heavy-duty anchor system, integrated remote tracking display, and other features usually seen only on larger drills.
Easy to mobile, easy to turn, and rides on turf-friendly tracks for less surface disturbance.
Shortest drill in its class, for easy setup in tight spaces.
Operator is positioned near the center of the pipe rack for easy pipe handling; seat slides fore and aft so pipe is easy to reach.
JT1220 MACH I DIMENSIONS U.S.
Overall length* 188 in
Overall width* 51.5 in
Overall height* 78 in
Drilling unit operating mass* 9700 lb
Entry angle 10° to 14°
Angle of approach 18°
Angle of departure 18°
POWER PIPE U.S.
Length, nominal* 120 in
Diameter* 1.82 in
Diameter, tool joint end* 2.38 in
Bend radius, min 105 ft
Weight, lined* 54 lb
POWER U.S.
Engine Cummins B3.3
Fuel Diesel
Cooling medium Liquid
Injection Direct
Aspiration Natural
Cylinders 4
Displacement 199 in3
Bore 3.74 in
Stroke 4.53 in
Manufacturer's gross power rating** 60 hp
Rated speed 2200 rpm
DRILLING FLUID SYSTEM (ON-BOARD) U.S.
Drilling fluid pressure, maximum* 1250 psi
Drilling fluid flow, maximum* 15 gpm
FLUID CAPACITIES U.S.
Hydraulic reservoir 17 gal
Fuel tank 19 gal
BATTERY U.S.
SAE Reserve capacity rating 195 min
SAE Cold crank rating @ 0° F (-18° C)
Specifications are general and subject to change without notice. If exact measurements are required, equipment should be weighed and measured. Due to selected options, delivered equipment may not necessarily match that shown. Contains patented features. *Per SAE J2022 **Per SAE J1995
The 60-hp (45 kW) JT1220 Mach 1 helps you consistently drill and backream with extraordinary precision. Mach 1 technology, as the term implies, keeps the job moving, controlling the ground drive, pipeloader and all drilling functions, monitoring and troubleshooting the system—and getting you to the next jobsite at warp speed.
Minimal noise output for longer operation in residential or commercial areas.
Open-top vise wrenches provide excellent visibility of pipe tool joints during pipe makeup and breakout.
JT2020 MACH I DIMENSIONS U.S.
Overall length* 203 in
Overall width* 51.5 in
Overall height* 78 in
Drilling unit operating mass* 10,800 lb
Entry angle 10° to 14°
Angle of approach 18°
Angle of departure 18°
POWER PIPE U.S.
Length, nominal* 120 in
Diameter 2.06 in
Diameter, tool joint end* 2.63 in
Minimum bend radius 130 ft
Weight (lined)* 67 lb
OPERATION U.S.
Maximum spindle speed* 150 rpm
Maximum spindle torque* 2200 ft·lb
Carriage thrust travel speed* 140 fpm
Carriage pullback travel speed* 140 fpm
Thrust force* 17,000 lb
Pullback force* 20,000 lb
Bore diameter 4 in
Backream diameter (soil dependent) Variable
Ground travel speed, maximum*
Forward 3 mph 4.8 km/h
Reverse 3 mph 4.8 km/h
POWER U.S.
Engine Cummins B3.3
Fuel Diesel
Cooling medium Liquid
Injection Direct
Aspiration Turbocharged
Number of cylinders 4
Displacement 199 in3
Bore 3.74 in
Stroke 4.53 in
Manufacturer's gross power rating** 83 hp
Rated speed 2400 rpm
DRILLING FLUID SYSTEM (ON-BOARD) U.S.
Drilling fluid pressure, maximum* 1500 psi
Drilling fluid flow, maximum* 30 gpm
FLUID CAPACITIES U.S.
Hydraulic reservoir 17 gal
Fuel tank 30 gal
BATTERY U.S.
SAE Reserve capacity rating 195 min
SAE Cold crank rating @ 0° F (-18° C)
Specifications are general and subject to change without notice. If exact measurements are required, equipment should be weighed and measured. Due to selected options, delivered equipment may not necessarily match that shown. Contains patented features. *Per SAE J2022 **Per SAE J1995
The 83-hp (62 kW) JT2020 packs 20,000 pounds of pulling power and the highest ratio of power to size in its class. This well-balanced, powerful drill is engineered with a one-step anchoring system for quick setup and a groundbreaking pipeloader that allows column selection from the operator's station.
The highest ratio of power to size enables the unit to install larger product in a wider variety of soil types, even in tight areas.
JT2020 packs 20,000 pounds of pulling power in a compact package.
High fluid flow for longer installations and work in sandy conditions.
JT2720 MACH I DIMENSIONS U.S.
Length 242 in
Width 78.5 in
Height (over sheet metal) 62 in
Height (over exhaust stack) 92 in
Weight (w/ full pipe box) 20,320 lb
DRILL PIPE U.S.
Length 118 in
Capacity, Max 50 pipe
JT3020 MACH I DIMENSIONS U.S.
Overall machine length 219.3 in
Overall machine width 79.4 in
Overall machine height 114.5 in
Operating weight 21,660 lb
Entry angle 10° to 16°
Angle of approach 19.4°
Angle of departure 17.7°
POWER PIPE U.S.
Length of drill pipe, nominal 118 in
Diameter of drill pipe tool joint end 3 in
Diameter of drill pipe 2.38 in
Minimum bend radius 175 ft
Weight of drill pipe
Lined 90 lb
And large box (48 pipe) 5390 lb
And small box (25 pipe) 2972 lb 1348 kg
ALL TERRAIN PIPE U.S.
Length of drill pipe, nominal 112 in
Diameter of drill pipe tool joint end 3.25 in
Diameter of drill pipe 2.23 in
Minimum bend radius 175 ft
Weight of drill pipe
Lined 100 lb
And large box (35 pipe) 4594 lb
And small box (20 pipe) 2783 lb
OPERATION U.S.
Maximum spindle speed 225 rpm
At inner spindle 400 rpm
Maximum spindle torque 4000 ft·lb
At inner spindle 800 ft·lb
Carriage thrust travel speed 120 fpm
Carriage pullback travel speed 120 fpm
Thrust force 24,800 lb
Pullback force 30,000 lb
Bore diameter 4.5 in
Backream diameter Soil dependent
Ground travel speed
Forward 2.4 mph
Reverse 2.25 mph
POWER U.S.
Engine Cummins QSB4.5
Fuel Diesel
Cooling medium Liquid
Injection Direct
Aspiration Turbocharged & charge air cooled
Number of cylinders 4
Displacement 275 in3
Bore 4.02 in
Stroke 5.42 in
Manufacturer's gross power rating 148 hp
Rated speed 2300 rpm
Peak gross power @ 2000 rpm 156 hp 116 kW
DRILLING FLUID SYSTEM U.S.
Maximum drilling fluid pressure 1500 psi
Maximum drilling fluid flow 50 gpm
FLUID CAPACITIES U.S.
Fuel tank 42 gal
Hydraulic reservoir 27 gal
Specifications are general and subject to change without notice. If exact measurements are required, equipment should be weighed and measured. Due to selected options, delivered equipment may not necessarily match that shown.
Introducing the JT3020. One of the roughest, toughest directional drills ever made. Because when the ground gets tough, the JT3020's 148-hp turbocharged diesel engine gets tougher. Yet with all of this power, the engine is amazingly quiet—with less noise than engines even a fraction of its size.
Cummins turbocharged diesel engine with "power bulge" automatically increases torque to power through tough drilling conditions.
Operator's station—including an exclusive electronic information center—puts all drilling information and control at the operator's fingertips.
Field-proven, heavy-duty rack and pinion thrust drive with welded-on double rack offers minimum maintenance and maximum reliability.
JT2720 ALL TERRAIN DIMENSIONS U.S.
Length 248 in
Width 81 in
Height (over sheet metal) 62 in
Height (over exhaust stack) 92 in
Weight (w/ full pipe box) 19850 lb
ALL TERRAIN U.S.
Length (w/o inner rod) 112 in
Capacity 35 AT Pipe
JT3020 ALL TERRAIN DIMENSIONS U.S.
Overall machine length (driving)* 220 in
Overall machine length (transport)* 221 in
Overall machine width* 80 in
Overall machine height (driving)* 119 in
Overall machine height (transport)* 94 in
Drilling unit operating mass* 22,200 lb
Entry angle* 10° to 16°
Angle of approach 19°
Angle of departure 18°
ALL TERRAIN PIPE U.S.
Length of drill pipe* nominal 112 in
Diameter of drill pipe tool joint end* 3.25 in
Diameter of drill pipe* 2.23 in
Bend radius, min. 175 ft
Weight of drill pipe* (with inner rod) 100 lb
And large box (35 pipe) 4800 lb
And small box (20 pipe) 3100 lb
ALL TERRAIN LEAD PIPE U.S.
Length of drill pipe* nominal 112 in
Diameter of drill pipe tool joint end* 3.25 in
Diameter of drill pipe* 2.06 in
Bend radius, min. 175 ft
Weight of drill pipe* (with inner rod) 98 lb
POWER U.S.
Engine Cummins QSB4.5
Fuel Diesel
Cooling medium Liquid
Injection Direct
Aspiration: Turbocharged & charge air cooled
Number of cylinders 4
Displacement 275 in3
Bore 4.02 in
Stroke 5.42 in
Manufacturer's gross power rating** 148 hp
Rated speed 2300 rpm
Peak gross power @ 2000 rpm 156 hp
DRILLING FLUID SYSTEM (ONBOARD) U.S.
Drilling fluid pressure, max.* 1500 psi
Drilling fluid flow, max.* 50 gpm
FLUID CAPACITIES U.S.
Hydraulic reservoir 27 gal
Fuel tank 42 gal
BATTERY (2 USED) U.S.
SAE reserve capacity rating 195 min
SAE cold crank rating @ 0° F (-18° C) 950 A
* called out according to SAE J2022. ** called out according to SAE J1995.
When drilling solid rock, you need the rock-solid JT3020 All Terrain directional drill. This HDD system is recognized as the industry leader when it comes to rock-based installations. Thanks to such innovations as an advanced dual-drive pipe system and a hydraulic, heavy-duty anchor system, the 148-hp (110 kW) JT3020 All Terrain can steer, drill and backream up to 650 feet.
The JT3020 All Terrain can be firmly secured in any type of ground, including rock, through a hydraulic, heavy-duty anchor system.
Mechanical motor system greatly expands the capacity to drill in tough ground conditions; most bores are accomplished with minimal drilling fluid flow, reducing jobsite cleanup time and expense.
Cruise control for pilot boring and backreaming improves productivity by reducing operator fatigue.
JT4020 MACH I DIMENSIONS U.S.
Overall machine length* 337 in
Overall machine width* 87 in
Overall machine height* 96 in
Operating weight 27,670 lb
Entry angle*: 10° to 16°
Angle of approach: 17°
Angle of departure: 17°
POWER PIPE U.S.
Length of drill pipe, nominal* 177 in
Diameter of drill pipe, tool joint end* 3.5 in
Diameter of drill pipe* 2.81 in
Bend radius, minimum 190 ft
Weight of drill pipe* 158 lb
Weight of drill pipe & large box (32 pipe) 6000 lb
Weight of drill pipe & small box (16 pipe) 3100 lb
POWER U.S.
Engine: Cummins QSB6.7
Fuel: Diesel
Cooling medium: Liquid
Injection: Direct
Aspiration: Turbocharged & charge air cooled
Number of cylinders: 6
Displacement 409 cu in
Bore 4.21 in
Stroke 4.88 in
Manufacturer's gross power rating** 190 hp
Rated speed: 2400 rpm
DRILLING FLUID SYSTEM U.S.
Drilling fluid pressure, maximum* 1300 psi
Drilling fluid flow, maximum* 120 gpm
Drilling fluid flow, maximum (at pump) 70 gpm
FLUID CAPACITIES U.S.
Fuel tank 55 gal
Hydraulic reservoir 36 gal
Specifications are general and subject to change without notice. If exact measurements are required, equipment should be weighed and measured. Due to selected options, delivered equipment may not necessarily match that shown. Contains patented features. *Per SAE J2022 **Per SAE J1995
With its specialized, 15-ft (4.5 m) drill pipe, the rubber-tracked JT4020 Mach 1 has the power and stability to pull multiple conduits up to 1000 feet (305 m) in a single pass—assisted by an exclusive cruise control feature that maintains thrust and rotation settings.
190-hp (142 kW) diesel engine has the power to drive all functions simultaneously.
Hydraulic, four-point anchor system enables the unit to be firmly secured in all types of ground conditions.
Field-proven, heavy-duty rack and pinion thrust drive with welded-on double rack offers minimum maintenance and maximum reliability.
DIMENSIONS U.S.
Overall machine length* 337 in
Overall machine width* 87 in
Overall machine height* 96 in
Operating weight 28,170 lb
Entry angle*: 10° - 16°
Angle of approach: 17°
Angle of departure: 17°
ALL TERRAIN PIPE U.S.
Length of drill pipe, nominal* 171 in
Diameter of drill pipe, tool joint end* 4.13 in
Diameter of drill pipe* 3.63 in
Bend radius, minimum 300 ft
Weight of drill pipe (with inner pipe)* 264 lb
Weight of drill pipe & large box (18 pipe) 5580 lb
Weight of drill pipe & small box (9 pipe) 3150 lb
POWER U.S.
Engine: Cummins QSB6.7
Fuel: Diesel
Cooling medium: Liquid
Injection: Direct
Aspiration: Turbocharged & charge air cooled
Number of cylinders: 6
Displacement 409 cu in
Bore 4.21 in
Stroke 4.88 in
Manufacturer's gross power rating** 190 hp
Rated speed: 2400 rpm
DRILLING FLUID SYSTEM U.S.
Drilling fluid pressure, maximum* 1300 psi
Drilling fluid flow, maximum* 120 gpm
Drilling fluid flow, maximum (at pump)*
FLUID CAPACITIES U.S.
Fuel tank 55 gal 208 L
Hydraulic reservoir 36 gal
Specifications are general and subject to change without notice. If exact measurements are required, equipment should be weighed and measured. Contains patented features. Due to selected options, delivered equipment may not necessarily match that shown. *Per SAE J2022 **Per SAE J1995
The JT4020 All Terrain HDD system can steer, drill and backream in just about any type of soil—even solid rock—up to 1000 feet. The 190-hp (142 kW) JT4020 All Terrain is the product of exceptional Ditch Witch engineering, with patented features like a two-pipe rock-drilling system and an integrated electronic system with cruise control.
Patented mechanical rock-drilling system provides more power to the bit than any other rock-drilling system in its class.
Instrument panel gauges are positioned for visibility, controls are conveniently placed, and a single lever controls drilling and backreaming adjustments.
Field-proven, heavy-duty rack and pinion thrust drive with welded-on double rack offers minimum maintenance and maximum reliability.
DIMENSIONS U.S.
Overall machine length* 348 in
Overall machine width* 101 in
Overall machine height* 110 in
Drilling unit operating mass* 43,900 lb
Entry angle* 10 ° to 15°
Angle of approach 13°
Angle of departure 17°
POWER PIPE U.S.
Length of drill pipe (nominal)* 177 in
Diameter of drill pipe tool joint end* 4 in
Diameter of drill pipe* 3.62 in
Minimum bend radius 230 ft
Weight of drill pipe* 229 lb
Weight of drill pipe & box (JT8020 12 pipe) 3760 lb
Weight of drill pipe & extra box (JT8020 12 pipe) 3760 lb
POWER U.S.
Engine Deutz BF6M1013 ECP
Fuel Diesel
Cooling medium Liquid
Injection Direct
Aspiration Turbocharged & charge air cooled
Number of cylinders 6
Displacement 436 in3
Bore 4.25 in
Stroke 5.1 in
Manufacturer's gross power rating** 261 hp
Rated speed 2300 rpm
DRILLING FLUID SYSTEM (ON-BOARD) U.S.
Maximum drilling fluid pressure* 1000 psi
Maximum drilling fluid flow* 230 gpm
FLUID CAPACITIES U.S.
Hydraulic reservoir 47 gal
Fuel tank 97 gal
BATTERY (2 USED) U.S.
SAE Reserve capacity rating 450 min
SAE Cold crank rating @ 0° F (-18° C) 1400 A
Specifications are general and subject to change without notice. If exact measurements are required, equipment should be weighed and measured. Due to selected options, delivered equipment may not necessarily match that shown. Contains patented features. *Per SAE J2022 **Per SAE J1995
Featuring a six-cylinder diesel engine generating 261 hp (195 kW), the JT8020 Mach 1 has the power and torque to provide maximum fluid flow and downhole productivity. The JT8020 Mach 1's advanced electronic system provides cruise control, automatic pipe loading, and on-board diagnostics to simplify overall operation.
Optional on-board crane rotates 360°, and can be used for anchoring the drilling unit, changing pipe boxes, lifting and moving downhole tools, and other routine lifting needs.
200+ gpm (757 L/min) drilling fluid pump, drilling fluid lines and swivel are designed to enhance downhole performance.
PULLING UNIT U.S.
Pullback force 99,200 lb
Length 75 in
Width 9.8 in
Height 29.5 in
Weight 1190 lb
Rod diameter 1.77 in
Rod weight 26.5 lb
Rod length 39.4 in
ROD MAKE-UP DEVICE U.S.
Length 23.6 in
Width 15.7 in
Height 19.7 in
Weight 408 lb
POWER PACK U.S.
Length 59 in
Width 38.6 in
Height 37.4 in
Weight 1210 lb
POWER U.S.
Engine Kubota D1105E
Fuel Diesel
Cooling medium Liquid
Injection Indirect
Aspiration Natural
Number of cylinders 3
Displacement 68.6 in3
Bore 3.07 in
Stroke 3.09 in
Manufacturer's gross power rating (per SAE J1995) 26 hp
Estimated net power rating (per SAE J1349) 25 hp
Rated speed 3000 rpm
HYDRAULIC SYSTEM U.S.
Main pump
Flow, max. 7.4 gpm
Pressure, max. 3600 psi
FLUID CAPACITIES U.S.
Fuel tank 5.3 gal
Hydraulic reservoir 37 gal
Specifications are general and subject to change without notice. If exact measurements are required, equipment should be weighed and measured. Due to selected options, delivered equipment may not necessarily match that shown. Contains patented features.
The compact PR50 is just ten inches (250 mm) wide, making it the most portable of the Ditch Witch pipe bursting family. But with 50 tons of pullback force, it can still replace large-diameter pipe economically and with extraordinary efficiency.
PR50 can fracture or cut any type of existing pipe—water, sewer, or utility—and pull in new pipe with 50 tons of pullback force.
The static PR50 has the power to fracture and replace not only clay and PVC but also pipe made of steel, ductile iron, and cast iron—all with minimal disturbance to the surrounding infrastructure.
PULLING UNIT U.S.
Pullback force 143,300 lb
Length 102 in
Width 15.7 in
Height 31.5 in
Weight 3090 lb
Rod diameter 1.97 in
Rod weight 33 lb
Rod length 39.4 in
ROD MAKE-UP DEVICE U.S.
Length 23.6 in
Width 15.7 in
Height 19.7 in
Weight 408 lb
POWER PACK U.S.
Length 59 in
Width 38.6 in
Height 37.4 in
Weight 1210 lb
POWER U.S.
Engine Kubota D1105E
Fuel Diesel
Cooling medium Liquid
Injection Indirect
Aspiration Natural
Number of cylinders 3
Displacement 68.6 in3
Bore 3.07 in
Stroke 3.09 in
Manufacturer's gross power rating (per SAE J1995) 26 hp
Estimated net power rating (per SAE J1349) 25 hp
Rated speed 3000 rpm
HYDRAULIC SYSTEM U.S.
Main pump
Flow, max. 7.4 gpm
Pressure, max. 3600 psi
FLUID CAPACITIES U.S.
Fuel tank 5.3 gal
Hydraulic reservoir 37 gal
Specifications are general and subject to change without notice. If exact measurements are required, equipment should be weighed and measured. Due to selected options, delivered equipment may not necessarily match that shown. Contains patented features.
The PR75 has just the right combination of size and power to replace a wide variety of pipe in congested urban centers and neighborhoods. Engineered with heavy-duty components and designed with few moving parts, the low-maintenance, incredibly durable PR75 is a long-term solution for the long-term challenge of replacing urban infrastructure.
PR75 can fracture or cut any type of existing pipe—water, sewer, or utility—and pull in new pipe with 75 tons of pullback force.
The static PR75 has the power to fracture and replace not only clay and PVC but also pipe made of steel, ductile iron, and cast iron—all with minimal disturbance to the surrounding infrastructure.
PULLING UNIT U.S.
Pullback force 187,400 lb
Length 71 in
Width 27.6 in
Height 43.3 in
Weight 7050 lb
Rod diameter 1.97 in
Rod weight 33 lb
Rod length 39.4 in
ROD MAKE-UP DEVICE U.S.
Length 23.6 in
Width 15.7 in
Height 19.7 in
Weight 408 lb
POWER PACK U.S.
Length 83 in
Width 51.2 in
Height 49.2 in
Weight 3200 lb
POWER U.S.
Engine Kubota V3300E
Fuel Diesel
Cooling medium Liquid
Injection Indirect
Aspiration Natural
Number of cylinders 4
Displacement 202 in3
Bore 3.86 in
Stroke 4.33 in
Manufacturer's gross power rating (per SAE J1995) 63 hp
Estimated net power rating (per SAE J1349) 59 hp
Rated speed 2200 rpm
HYDRAULIC SYSTEM U.S.
Main pump
Flow, max. 14.5 gpm
Pressure, max. 3600 psi
Jaw pump
Flow, max. 7.4 gpm
Pressure, max. 3600 psi
FLUID CAPACITIES U.S.
Fuel tank 10.6 gal
Hydraulic reservoir 53 gal
Specifications are general and subject to change without notice. If exact measurements are required, equipment should be weighed and measured. Due to selected options, delivered equipment may not necessarily match that shown. Contains patented features.
The world's water, sewer and utility infrastructure isn't getting any younger. The PR95 pipe burster is one of the most economical solutions for the monumental challenge of replacing these millions of miles of pipe. The PR95 is designed to replace large sewer and utility pipe of up to 18 inches (600 mm) in diameter.
PR95 can fracture or cut any type of existing pipe—water, sewer, or utility—and pull in new pipe with 95 tons of pullback force.
The static PR95 has the power to fracture and replace not only clay and PVC but also pipe made of steel, ductile iron, and cast iron—all with minimal disturbance to the surrounding infrastructure.
